HP EliteDesk 800 G5 SFF SD card reader help

[JKAF3]

Hi everybody,

I have bought recently a second hand HP EliteDesk 800 G5 SFF, I am happy with it but there is no SD card reader and i cant seem to find the correct part online, any help would be appreciated.

Kind regards

Josh

[resistencia]

Hi @JKAF3 

the part number is , use that number of parts in a search engine 

L15896-001

[JKAF3]

 

(the top of the pictures is the direction of the front panel)

from looking at the cable and the connector and looking inside my unit, i dont see how it can connect to the board AND attach itself to the front of the unit?

[resistencia]

Did you buy the part ? or what is the reason for saying that it does not work?

[JKAF3]

Well if you look at the pins in the socket I circled and the connector you sent, they don’t match up. They would match up if the cable was angled down towards the back of the case but then it wouldn’t reach the panel if that makes sense?

[resistencia]

you count the pins I see 4 pins of 2, and 1 pin of 1 and then 2 pins of 2 Exactly to your image, I don't understand what your doubt is, 

[JKAF3]

ok so on my board, the socket i circled goes from top to bottom,

2-2-1 on right-2-2-2-2

the sockets the pins go into on the cable goes

2-1 on the left-2-2-2-2

how is it supposed to connect to board?

[resistencia]

I don't really understand what you are saying, unfortunately I don't have more to add.

Deal4GO SD4.0 Reader Board L15896-001 Replacement for HP EliteDesk 800 G4 G5 805 G6 ProDesk 600 400 ...

You can open a new message and search for another answer. Have a nice day

[JKAF3]

the socket on the board i circled, is it the correct socket?

just noticed it has 7 rows of pins but the cable has 6 rows?