cancel
Showing results for 
Search instead for 
Did you mean: 
dudger
Level 1
8 4 0 0
Message 1 of 4
246
Flag Post
HP Recommended

Heat Sink Fan

HP Pavilion Desktop - 510-p127c PC
Microsoft Windows 10 (64-bit)

Having a problem with my heat sink fan. It occasionally speeds up  or when I click on something. This has been going on for about 6 months.

Per the community advisement. I took the fan out and thoroughly cleaned the heat sink and put the fan back in. The heat sink did not need much cleaning and the fan looks good.  Any suggestions?

 

Thanks 

Bob

3 REPLIES 3
HP Support Agent
HP Support Agent
18,091 18,080 1,198 1,855
Message 2 of 4
170
Flag Post
HP Recommended

Heat Sink Fan

@dudger,

 

Welcome to the HP Support Community!

 

I reviewed your post and I understand that the heat sink fan is not working correctly.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

I recommend you update the BIOS from the below link and check if it helps.

 

https://support.hp.com/in-en/drivers

 

Follow the steps in the below article to update the BIOS.

 

https://support.hp.com/in-en/document/c00042629

 

Let me know how it goes and you have a great day!

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

The_Fossette
I am an HP Employee

Reply
0 Kudos
Highlighted
dudger
Level 1
8 4 0 0
Message 3 of 4
116
Flag Post
HP Recommended

Heat Sink Fan

Hello. I upgraded the BIOS as suggested. On the Reboot. I had an error code 90B. (Heat sink fan). 

I still have the problem of random speed up on the Heat Sink fan.

 

Do not see that error anymore every time I boot up but still have the problem 

Reply
0 Kudos
HP Support Agent
HP Support Agent
5,051 5,043 316 367
Message 4 of 4
95
Flag Post
HP Recommended

Heat Sink Fan

@dudger

 

Thank you for the response. Let us run a test on the hardware components of the PC

 

1. Hold the power button for at least five seconds to turn off the computer.

2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.

3. Perform System Test > Extensive test. Share the result on your next post.

 

Also, perform steps 1, 2 and 3 mentioned in this document.

 

For more info on 90B error, refer to this document.

 

Let me know how this goes.

 

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

KUMAR0307
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation