cancel
Showing results for 
Search instead for 
Did you mean: 
fmatzinger
New member
4 3 0 0
Message 1 of 6
219
Flag Post

How to add ram to a HP Pavilion All-in-One 24-f1018nf

HP Recommended
All-in-One 24-f1018nf
Microsoft Windows 10 (64-bit)

By default, I have 8GB (1x8GB?), but 2GB may be used by the graphic card, thus only 6GB are available.

How to open the computer to add more RAM?

May I add 1x8GB at a maximum?

 

5 REPLIES 5
fmatzinger
Author
New member
4 3 0 0
Message 2 of 6
Flag Post
HP Recommended

+

need I to buy another ddr4-2400? seems difficult to find.

or another speed? 2666? 3200?

or would it be best to remove the existing 1x8GB 2400 and replace it with 2x8GB 2666 or 3200?

Reply
0 Kudos
Prométhée
Level 16
Level 16
3,641 3,597 400 1,593
Message 3 of 6
Flag Post
HP Recommended

hi

HP All-in-One 24-f1018nf Product Specifications

 

Motherboard Specifications, Savoy

 

  • Dual channel memory architecture
  • Two DDR4 SODIMM (260-pin) sockets
  • Supports up to PC4-19200 (DDR4-2400)
  • Supports 2 GB, 4 GB, and 8 GB SODIMMs
  • Supports up to 4 GB on 32-bit systems
    note:
    32-bit systems cannot address a full 4.0 GB of memory.
  • Supports 16 GB (unbuffered) with two 8 GB DIMMs on 64-bit systems

try scan

Crucial.fr - Le scanner système Crucial

 

most often you have to use the same modules
So try a module, as close as possible to the one in place
if it works so good   , if not, it will be necessary to buy the same chosen one

 

 


Expert volontaire :Forum Fr 17-10-2009 :

Please remember to mark the answers this can help other users:
please click on the accept as solution button if message provided an answer to the problem

Reply
0 Kudos
fmatzinger
Author
New member
4 3 0 0
Message 4 of 6
Flag Post
HP Recommended

hi,

 

Thanks for your answer; which confirms my computer supports a maximum of 2x8GB.

 

But

 

1) how should I open the computer

first to check I have 1x8GB and not 2x4GB

then to add RAM

?

 

2) Because DDR4-2400 seems difficult to find/buy these days,

I would prefer to know, before buying, if it would work with 1x8GB 2400 + 1x8GB at a higher speed.

Reply
0 Kudos
Prométhée
Level 16
Level 16
3,641 3,597 400 1,593
Message 5 of 6
Flag Post
HP Recommended

Unless I'm mistaken, you should have found the documents with the links already given, so you have this:

Upgrading & Servicing Guide

But I can not certify that this is the correct one, sometimes there are errors, you will quickly see if it matches, normally:

For speed, the motherboard supports what is stated according to information from hp
the AMD Ryzen ™ 5 3500U processor
Maximum memory speed
Up to 2400MHz

Little chance therefore that it works, if by chance it works, the speed will certainly be blocked at the maximum speed supported

 


Expert volontaire :Forum Fr 17-10-2009 :

Please remember to mark the answers this can help other users:
please click on the accept as solution button if message provided an answer to the problem

Reply
0 Kudos
fmatzinger
Author
New member
4 3 0 0
Message 6 of 6
Flag Post
HP Recommended

Hi,

Not sure it is the correct documentation, since I have at least one maybe 2 more screws to remove.

Still got issues to lift the screen.

Will keep you informed when I can proceed further.

BR

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation