cancel
Showing results for 
Search instead for 
Did you mean: 
Humbacon
New member
1 0 0 0
Message 1 of 2
272
Flag Post

Omen Obelisk Fan Problems When Shutting Down

HP Recommended
Omen Obelisk
Microsoft Windows 10 (64-bit)

Last night I attempted to shut down my omen obelisk after I had finished using it and the fan suddenly started going at full power. The monitor turned off as usual but the pc itself starting freaking out and the fan went at full speed making a large noise. I attempted to hit the power button to stop the pc but nothing happened. I eventually had to unplug the pc to stop the noise. When I plugged it back in it turned on and I shut it down with no problems. Is this a known problem and is there a way to fix it? 
Sidenote: I had a similar problem on a smaller scale when starting the computer. The fans went to full speed for a moment before starting.

1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
26,796 26,669 1,466 1,537
Message 2 of 2
Flag Post
HP Recommended

@Humbacon

 

Welcome to the HP support community.

 

Step 1: Adjust the computer power settings

Adjust the power settings to decrease power consumption, which can help the fans maintain an optimal internal temperature up to 30° C (86° F).

  1. Turn on the computer.

  2. In Windows, search for and open Control panel.

  3. In the Control Panel search field, type power options, and then select Power Options from the list.

    Selecting Power Options

  4. Click Change plan settings.

    Changing  the plan settings

  5. Click Change advanced power settings.

    Clicking Change advanced power settings

  6. Click the drop-down menu, and then select Power saver.

    Example of the power saver option in Windows 10

  7. Select Sleep from the list, and then click Sleep after and Hibernate after to open each setting.

    NOTE: 

    Sleep mode places the computer in a power-saving mode that does not close any open applications, while Hibernation mode saves any work in open applications, and then turns the computer off.

    Clicking the Sleep after and Hibernate after settings

  8. Decrease the amount of time for each setting to reduce unnecessary strain on the fans when the computer is not being used.

  9. Click OK to save the changes.

  10. Restart the computer.

If the issue persists, continue to the next step.

 

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 2 ONWARD

(By the end of this article all the issues should be resolved)

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

 

Sandytechy20
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation