Psu upgrade for HP Pavilion 590-p0632ng

[DessyWizard]

I just would like to upgrade from a 180w to like a 500 but im not too sure about what is compatible 

[Nal_NR]

Hi @DessyWizard,

Welcome to the HP Support Community. 

I'd be happy to help you! 

Upgrading the power supply unit (PSU) in your HP Pavilion 590-p0632ng to a higher wattage unit like a 500W PSU is a good idea if you're planning to upgrade components such as the graphics card. Here are the steps and considerations to ensure compatibility and a successful upgrade:

Steps to Upgrade the PSU

Check Physical Dimensions:

• Ensure the new PSU physically fits inside your case. The HP Pavilion 590-p0632ng typically uses a standard ATX PSU, so most ATX PSUs should fit.
• Measure the dimensions of your current PSU and compare them with the dimensions of the new PSU.

Check Connectors:

• Verify that the new PSU has the required connectors for your motherboard, CPU, graphics card, and other peripherals.
• You will typically need:
  • A 24-pin ATX connector for the motherboard.
  • A 4+4 pin CPU connector.
  • PCIe connectors (6+2 pin) for your graphics card.
  • SATA connectors for your drives.

Choose a Reliable PSU:

• Choose a PSU from a reputable brand (e.g., Corsair, EVGA, Seasonic) with good reviews.
• Ensure the PSU has an 80 Plus certification (e.g., Bronze, Silver, Gold) for better efficiency and reliability.

Installing the New PSU

Turn Off and Unplug Your Computer:

• Ensure your computer is turned off and unplugged from the power source.

Open the Case:

• Remove the side panel of your desktop case to access the internal components.

Disconnect the Old PSU:

• Carefully disconnect all the power cables from the motherboard, CPU, graphics card, drives, and other components.
• Unscrew and remove the old PSU from the case.

Install the New PSU:

• Insert the new PSU into the case and secure it with screws.
• Connect the new PSU cables to the motherboard, CPU, graphics card, drives, and other peripherals. Ensure all connections are secure.

Close the Case and Test:

• Replace the side panel of your case.
• Plug in your computer and turn it on.
• Verify that your computer powers on and that all components are receiving power.

Compatibility Considerations

• Power Requirements: Ensure the new PSU meets the power requirements of your upgraded components. A 500W PSU is usually sufficient for mid-range graphics cards and additional peripherals.
• Cable Management: Properly manage the cables to ensure good airflow within the case.
• Warranty: Check if upgrading the PSU affects your warranty status

By following these steps, you should be able to upgrade your HP Pavilion 590-p0632ng's PSU to a 500W unit successfully. If you have any specific questions or run into issues during the upgrade, I recommend you contact phone support.

Hope this helps! Keep me posted for further assistance.

 Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.