-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
What is yours TG01-2003w in over the list of around 180 machines from the following list
Probably they use SAME Erica6 motherboard:
https://support.hp.com/au-en/document/c07094657
1. RAM: For RAM you can upgrade to 32GB
- Dual channel memory architecture (One DIMM per channel)
- Two DDR4 UDIMM (288-pin) sockets
- Supports up to PC4-25600 (DDR4-3200)
- Supports 4 GB and 8 GB DDR4 UDIMMs
- Supports up to 4 GB on 32-bit systems
note:
32-bit systems cannot address a full 4.0 GB of memory. - Supports up to 32 GB (unbuffered) with two 16 GB DIMMs on 64-bit systems
For example : Crucial 32GB (2x16GB) kit
Crucial also says you can upgrade to 64GB (2x32) kit
2. Video card : I do not know your machine (on the list and I can not read them all) therefore very hard to tell. Basically you need to know what is its current PSU (watt) with its existing AMD Radeon RX 5500. To upgrade to a new higher wattage card you need to add the difference watts to existing PSU to buy a new PSU.
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
HP Recommended
What is yours TG01-2003w in over the list of around 180 machines from the following list
Probably they use SAME Erica6 motherboard:
https://support.hp.com/au-en/document/c07094657
1. RAM: For RAM you can upgrade to 32GB
- Dual channel memory architecture (One DIMM per channel)
- Two DDR4 UDIMM (288-pin) sockets
- Supports up to PC4-25600 (DDR4-3200)
- Supports 4 GB and 8 GB DDR4 UDIMMs
- Supports up to 4 GB on 32-bit systems
note:
32-bit systems cannot address a full 4.0 GB of memory. - Supports up to 32 GB (unbuffered) with two 16 GB DIMMs on 64-bit systems
For example : Crucial 32GB (2x16GB) kit
Crucial also says you can upgrade to 64GB (2x32) kit
2. Video card : I do not know your machine (on the list and I can not read them all) therefore very hard to tell. Basically you need to know what is its current PSU (watt) with its existing AMD Radeon RX 5500. To upgrade to a new higher wattage card you need to add the difference watts to existing PSU to buy a new PSU.
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community