06-14-2019 09:20 PM - edited 06-14-2019 11:44 PM
I am trying to upgrade the hard drive that is in this system. I have tried to add a msata and a sata SSD with the same results. I have tried both as a secondary drive and a primary drive setup. Windows installs fine and gets through setup fine but once in Windows it crashes/restarts. If I plug the original hard drive back in by itself it works fine. Is there a BIOS setting I need to change? Is there anything else I can try as the BIOS is up to date also.
06-16-2019 02:00 PM
What size are these msata and a sata SSD devices? The original HD is 1TB.
How did you "create" the install?
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
06-17-2019 07:12 AM
Please close this thread. It ended up being Windows update grabbing the wrong drivers as soon as the PC was booted. I had to pull the machine off the network initially and updated the AMD drivers first before butting the PC back on the network.
06-17-2019 09:04 AM
My boot is one of the SSD's and I've not had any restart issue at all. Question, did you use the connection and cabling from the CD/DVD drive? If not, I would do that first and go USB on the dvd. Then split that to run the 2 additional HDD's. There's plenty of pwr. in the 300 W supplied supply to run them all.