cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
AshuSharma123
Level 1
6 1 1 0
Message 1 of 2
183
Flag Post

USB 3.o ports after switching the case

HP Recommended
HP 700qe
Microsoft Windows 10 (64-bit)

Looked at this thread - now it is archived.

I am using this new case from Antec

as new MSI Nvidia 1050 Ti has been put into along with SSD and other upgrades.

Upgraded the PSU also.

 

Back USB ports are working but is there a provision to connect the cables from the new case into this motherboard for USB 3 or usb 2?

 

Please let me know.

 

1 REPLY 1
itsmyname
Level 9
5,033 4,948 234 653
Message 2 of 2
Flag Post
HP Recommended

The USB3 ports are connected to the motherboard, not to the new case.

 

So, look at the motherboard's USB slots for those slots with a blue "tongue" inside the socket, which indicates USB3. A "black" tongue will indicate USB1 or USB2.

 

Some motherboards have USB3 "sockets" directly on the motherboard. Use a cable to connect from those sockets to the USB ports on the front-panel of the new case.

 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation