Upgrade PSU HP G3 600 Prodesk MT

[YUNO83]

Hi ,  Firstable Sorry about my bad english.

I need help to upgrade my 250 w psu from my HP G3 600 Prodesk MT to install a GPU.

The problem is , the P2 connector, mine have 7 cables but when im looking in ebay or another website i can only find a lot of PSU with the p2 connector with 2 or 3 or 6 cables.

So do you think if it will work if a take one of these ? 

My PSU model  is  D16-250P1A

number : 901760-002

i need a PSU with 400 w minimum 

thx for helping me TEAM 

 

 

[NonSequitur777 · Accepted solution]

@YUNO83,

Welcome to our HP community forum!

The HP ProDesk 600 G3 MT was one of my upgrade projects, and there is a compatible 400-watt power supply with p/n: 942332-001 which is equipped with a 6+2-PCIe power cable.  Mind you, this power supply lacks the purple wire on the proprietary "P2" 7-pin connector, but this made no difference whatsoever: my HP ProDesk 600 G3 MT issued no beeps, error message(s), a flashing red light or other issues.  The cooling fans also rev up when the CPU heats up.

Btw, this 400-watt power supply can power a smaller-sized (dual fan) RTX 4060 model, powered by a single 8-pin PCIe power cable, such as this example: ASUS DUAL RTX 4060 Specs | TechPowerUp GPU Database.

Kind Regards,

NonSequitur777

[YUNO83]

you are wonderful thx a lot for these information !

[NonSequitur777]

@YUNO83,

You are welcome -glad I could assist!

Kind Regards / Cordialement,

NonSequitur777