-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Re: Upgrading Video Card using 6 pin to 8 pin Power Adapter ...
Create an account on the HP Community to personalize your profile and ask a question
08-03-2020 03:06 PM
WB2001 I didn't say I was unwilling to look. I said I didn't want to cut the tie on the cables. That entire wad of cables is coming out of the power box.
Push come to shove, I get the card, I run into issues, I'll drive it down to MicroCenter to trouble shoot.
Thanks for your time.
08-04-2020 09:51 AM
Hello
luckily there is @wb2001
Sorry @XheVoice I work and our hours are shifted, I could not answer more top
Indeed I did not understand because I saw only a connector with 4 pins and not two
So, if you don't have a 2-pin connector somewhere, you'll have to try to find an adapter, as I said.
There shouldn't be anything to cut then!
Take a good look at all the connectors, sometimes it's not obvious, and we have a hidden connector.
was this reply helpful , or just say thank you ? Click on the yes button
Please remember to mark the answers this can help other users
Desktop-Knowledge-Base
Windows 11 22h2 inside , user
------------------------------------------------------------------------------------------------------------
08-04-2020 02:30 PM
Ok thanks @Prométhée and @wb2001
I see two additional pins that I think are the power ones they are labeled P10
They are labeled like the cables in the Replacing the Video Cards | HP Omen 880 Desktop Computers | HP video on YouTube
So , those two white cables (P10), they should work right?
I ordered the ASUS GeForce RTX 2060 6GB Phoenix Fan Edition VR Ready HDMI DP DVI Graphics Card (Ph-RTX2060-6G) card, it should arrive between Thursday & Saturday. I will post an update when I get the new card.
Thanks again for your assistance.
08-05-2020 09:42 AM
It seems to me to be fine.
It seemed to me that by searching a little, there must be what it takes ..
I cannot certify it 100%, because I have the same type of lathe, only, not the same series, and unless I'm mistaken, it did have connectors!
However, we cannot guarantee the operation of the graphics card, sometimes a model is incompatible with the motherboard.
It may be necessary to verify the bios update.
As it is not without risk, I recommend it as a last resort
was this reply helpful , or just say thank you ? Click on the yes button
Please remember to mark the answers this can help other users
Desktop-Knowledge-Base
Windows 11 22h2 inside , user
------------------------------------------------------------------------------------------------------------
08-06-2020 09:25 AM
sorry, I don't know if it's a translation problem, I don't understand your request ..
are you talking about staff, or hp support assistant software ..?!
HP Support Assistant | HP® Official Site
was this reply helpful , or just say thank you ? Click on the yes button
Please remember to mark the answers this can help other users
Desktop-Knowledge-Base
Windows 11 22h2 inside , user
------------------------------------------------------------------------------------------------------------
- « Previous
-
- 1
- 2
- Next »
Didn't find what you were looking for? Ask the community