Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

Upgrading a 27-A279d All in One with an SSD

HP Recommended
HP All-in-One 27-A279d
Microsoft Windows 10 (64-bit)

My All in One is equipped with a 1Tb SATA hard disk.  I would like to upgrade it with either a replacement 1Tb SSD or additional SD storage device.  I am being asked what the pin connections are on this device to decide if this is technically possible.  Can anyone help?

Level 16
Level 16
6,161 6,089 676 2,480
Message 2 of 2
Flag Post
HP Recommended

Hello @Mikewm06 
you have this computer and the motherboard model


One M2. socket for SSD


an m2 port is indicated (without further information)
Here you have a model with the same motherboard:

Disque dur SSD M.2 128 Go

  • Taille : 128 Go
  • Interface : M.2
  • Type : SSD


You must therefore be able to install an M2 SSD
try the scan with the site here, it should help:

Welcome to Crucial USA



Please remember to mark the answers this can help other users
please click on the accept as solution button if message provided an answer to the problem

was this reply helpful , or just say "thank you " ? Click on the yes button


Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation