cancel
Showing results for 
Search instead for 
Did you mean: 
RCCincinnati
Level 1
4 1 0 0
Message 1 of 4
2,186
Flag Post

Where to buy a motherboard for ALL IN ONE Envy 23-o014

HP Recommended
Envy 23-o014 Motherboard:Quanta/Layia SSID 2B1B
Microsoft Windows 10 (64-bit)

Please let me know where  I can  buy a new motherboard for my Envy 23-o014 Motherboard:Quanta/Layia SSID 2B1B.

 

Thanks!!

3 REPLIES 3
wb2001
Level 15
Level 15
12,842 12,626 1,774 5,022
Message 2 of 4
Flag Post
HP Recommended

@RCCincinnati 

You do not state your reasoning ?  There are several component boards that    "create"    this completed system. You should rely upon a repair shop to validate which "separate component board" is defective.

https://www.newegg.com/Product/Product.aspx?Item=9SIAA7W8HP1964&ignorebbr=1&source=region&nm_mc=KNC-...

See the parts list for different boards

http://partsurfer.hp.com/Search.aspx?searchText=F3E94AA

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No
RCCincinnati
Author
Level 1
4 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Thanks for the response. 

I believe I need a new motherboard because the Bios in my all in one computer freezes on the Startup menu and I have done the following:

i upgraded the BIOS version to V80.11 03/07/2018 in my All in One computer  Envy-23-o0014.  Once the BIOS was upgraded I was asked to reboot the computer.  I rebboted the computer and it froze with the HP logo on the screen. (Picture 1). I hold the start button for 5 seconds to turn off the computer. Then. I turned on the computer and repeatably press the ESC key to go to the BIOS screen. (picture 2).  On this screen, I can see  the hedline "Startup Menu" but I can't selected because this screen is frozen.  I have done the following checks, but unfurtunatly the computer doesn't repond.

1) Replaced wireless keyboard to wire keboard

2) Memmory cards are in good condition.  (I checked them in a similar computer)

3) SSD hardrive is in good condition. (I checked it a similar computer)

4) Reset  CMOS using jumper on the motherboard

5) Remove battery

** I am not able to open the BIOS screen (BLUE Screen)

Was this reply helpful? Yes No
wb2001
Level 15
Level 15
12,842 12,626 1,774 5,022
Message 4 of 4
Flag Post
HP Recommended

@RCCincinnati,

BIOS versions are tied to the OS.  The V80.11 can only be installed successfully for WIN 8.1.

Unhappily you did not find a BIOS update which was compliant with WIN 10 installer.

You selected a version LISTED only for WIN 8.1 installer.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation