cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
AbsolutRebel
New member
1 0 0 0
Message 1 of 2
116
Flag Post

Will M.2 NVMe Gen 3.1x4 work with a Sata to PCIe adaptor

HP Recommended
Compaq Pro 6300 sff
Microsoft Windows 10 (64-bit)

I have been trying to locate information regarding my old desktop reading / loadind from PCIe SSD.  It is a compaq Pro 6300 sff, Win 10 , 339A mobo 16 gb Ram , I7 3770  The bios is Hewlett-Packard K01 v03.07 , 05/10/2018.  the 339A has a 3.0x16   So I understand I would have to use that.  But I have not been able to find any information on success or fail attempts.  Any help would be appreciated .

 

Thanks

1 REPLY 1
banhien
Level 20
Level 20
98,704 37,746 12,822 27,064
Message 2 of 2
Flag Post
HP Recommended

@AbsolutRebel 

 

It may work but you won't gain anything because the back end STILL using SATA controller. You have to pay more for nothing.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation