Showing results for 
Search instead for 
Did you mean: 
Level 1
5 2 0 0
Message 1 of 1
Flag Post

ex950 ssd no performing like it should

HP Recommended
EX950 nvme ssd
Microsoft Windows 10 (64-bit)

  Hi, I recently installed an ex950 in my second m.2 slot on my x570 motherboard but crystal disk mark shows it is not as fast as it should be by about 500MB/s on read and write sequential. I read that a new firmware was supposed to be out but I can't find it anywhere. Does anyone have any info on the new firmware or any other ideas as to why it might be running slower? There is no bandwidth issue as there are no pcie devices except for the single gpu and another pcie ssd in the first m.2 slot which do not effect the second m.2 slot. 

 Thank you all

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation