hp slim S01AD01IN desk top

[Harzuse]

my hp slim S01AD01IN desk top when I turn my computer on it showing power analog saving mode on the monitor for few seconds and screen goes blank have off/ on about several times same issue

[zoey7886]

@Harzuse, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding HP Slim Desktop S01AD01IN Monitor Issue! 

We're thrilled to have the opportunity to assist you and provide a solution.  

If your HP Slim S01AD01IN desktop shows "Power Analog Saving Mode" on the monitor for a few seconds and then goes blank, here are some steps you can follow to troubleshoot and potentially resolve the issue:

Check the Power Connection:

• Ensure that the power cord is properly connected to both the desktop and a power outlet.
• Make sure that the power outlet is functional and providing power.

Inspect Video Cable Connection:

• Verify that the video cable (VGA/HDMI/DVI) is securely connected to both the monitor and the desktop.
• If possible, try using a different video cable to rule out cable defects.

Switch Video Input Sources:

• If your monitor supports multiple input sources (VGA/HDMI/DVI), ensure that the correct source is selected on your monitor.

Test the Monitor with Another Device:

• Connect your monitor to another computer or device to check if the monitor itself is working properly.

Reset the Monitor Settings:

• Access the monitor’s on-screen display (OSD) menu and reset the monitor settings to their factory defaults.

Check the Graphic Card:

• If your desktop has a dedicated graphic card, make sure it is properly seated in its slot.
• Remove and reinsert the graphic card and ensure all connections are secure.  

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,