03-19-2012 08:21 AM - edited 03-26-2012 12:38 PM
So, I have Virtualization turned in the BIOS, and I've tried like heck to get Microsoft's HAV tool to detect it. It does not.
Virtualbox does not detect it either. In fact, the tool from AMD (AMD-V_Hyper-V_Compatibility_Check_Utility.zip) doesn't detect it too.
Is the BIOS broken from the manufacturer?
Does there need to be a patch applied from Microsoft to fix this, or is HP responsible to fix their own products via a new BIOS update?
And, before you post a reply, yes, I did go to BIOS, security options, set virtualization to "enabled", saved it, and then shut the PC off for 30 seconds before restarting it.
Solved! View Solution.
Re: <--Not Solved. Hp Pro 6405, AMD-V enabled in BIOS, but win7 pro 64bit not detecting it
06-29-2012 09:38 AM
I keep getting emails to ask me for what my solution was..
Here it is:
I replaced it with a whole different PC. I took the original peice of crap, loaded it to defaults, and sold it off to one of my clients who didn't need any VM services.
I ordered and Intel based Pro 3400 series unit, enabled Intel VT-x, and it worked right out of the box.
I've wasted too much of valueable time on this AMD system. It's broke,
To HP, you and your techs have no clue how to fix it, because it cannot be fixed. I'm not going to replace anymore motherboards, CPUs, and any other crap you keep sending me to swap out. This model is broken from the start and I advise anyone who has this to request a RMA and a replacement Intel unit.
So, that is my solution.
03-19-2012 09:09 AM
Please post the exact product number for your PC and the exact installed processor model.
Perhaps the installed processor doesn't support virtualization even though there is a bios setting for virtualization.
Try this tool in a native Windows 7 environment and see what happens. Test for 64 bit hardware. This does more than just check for 64 bit hardware.
Did you double check the bios change to make sure that the change was retained after a power off/on?
03-19-2012 01:13 PM
Listed as a Pro 3405 Series MT
The CPU is listed as an AMD A6-3650 APU with Radeon Graphics
The "Securable" program does report AMD-V as being offered. I don't know if that means its available and turned on, or available, but not turned on.
BTW, thanks for replying too. I'd really like to get this to work in order to test a few things at work, such as windows 8 compatibility with many of the programs our clients use.
03-19-2012 02:30 PM - edited 03-19-2012 02:43 PM
You didn't answer my above question. Did you boot into the bios and verify that virtualization is in fact set ?
Is this the version and date of the AMD utility that you tried to use? Did you run the utility as an admin?
Download PC Wizard and verify the the VT is enabled and not disabled as in the below image. Be sure to get the new version as the old version has a bug.
BTW, Disconnect your main boot hard drive and then install W8 on a separate hard drive.
03-21-2012 11:41 AM - edited 03-21-2012 11:43 AM
Sorry for not replying sooner. Lots of work at the office
The AMD utility reports that AMD-V is not enabled in BIOS. And trust me, I've checked it. It's enabled.
And yes, it's the same version and I did run it as administrator (it seems you can't run it unless you do select 'run as administrator')
The PC Wizard utility shows as:
NX - No-execute Page : Yes
AMD-V - Virtualization : Yes - Enabled
TXT - Trusted Execution Techno... No
and so on....
Very interesting. Any ideas?
03-26-2012 11:44 AM
Not being seen by any other programs. I guess this could be the fault of whoever writes the programs, such as Oracle (virtual box) or by either AMD and Microsoft.
I'll attempt to contact Oracle to see if this can be noted as a bug to have checked.
Thanks for you help.
03-26-2012 12:37 PM
Now, I am more than ever convinced there is something wrong with the BIOS of this PC.
I actually went into the BIOS and DISABLED the virtualization, hit f10 to save, saved bios and rebooted. I then ran your prescribed tool (PC Wizard 2012) to ensure it was disabled.
Your tool read
AMD-V = Enabled
Yet, I had it disabled in my BIOS.
So, I have to disregard that tool. It can't give me results like this.
Going to Virtualbox's forums, they have had many issues with HP PCs and BIOS glitches. I don't want to say I bought a lemon. I just want this fixed.
Perhaps a BIOS update?
03-26-2012 12:55 PM
Be sure to run the tools in a native, fresh installation Windows 7 environment. Double check to make sure that the setting was in fact saved in the bios.