memory upgrade for hp 6200 pro sff

[oldsparky]

Can I use 8 Gig ddr3 memory modules in hp 6200 pro sff? I would like to buy 2 8 gig modules for this machine

[banhien]

@oldsparky 

Its specs

             https://support.hp.com/au-en/document/c02779493

It supports 16GB 1333 MHz DDR3 SDRAM max (4 x 4GB) you can't install 8GB to one slot. You have to buy four 4GB modules.

Regards,

[Paul_Tikkanen]

Hi, @oldsparky 

You can install up to 4 x 8 GB of memory in your PC for a total of 32 GB.

See the HP quickspecs link below, page 7.

HP Compaq 6200 Pro Series (highspeedbackbone.net)

System Memory Support

The HP Compaq 6200 Elite Series supports the 2nd generation Intel® Core™ processor family. Based on a new PC microarchitecture, the processor is designed for a two-chip platform consisting of a processor and Platform Controller Hub (PCH). Unlike previous generations, the processor includes an integrated memory controller (IMC). The IMC supports DDR3 protocols with two independent, 64-bit wide channels each accessing one or two DIMMs.

Two channels of non-ECC unbuffered DDR3 memory with a maximum of two UDIMMs per channel
Single-channel and dual-channel memory organization modes
Data burst length of eight for all memory organization modes
DDR3 memory data transfer rates of 1066 MT/s (PC3-8500) and 1333 MT/s (PC3-10600)
64-bit wide channels
DDR3 I/O voltage of 1.5V
Maximum memory bandwidth of 10.6 GB/s in single-channel mode or 21 GB/s in dual-channel mode assuming DDR3 1333
MT/s (PC3-10600)
The largest memory capacity possible is 32GB using four (4) 8GB DIMMs