-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
The series HP All-in-One PC 22-dd0000a (7WY46AV) has few models/products
https://support.hp.com/us-en/product/product-specs/hp-all-in-one-pc-22-dd0000a/model/38255860
But they use SAME MonkD motherboard.
https://support.hp.com/us-en/document/c06543675
which shows
Memory upgrade information
- Dual channel memory architecture
- Two DDR4 SODIMM (260-pin) sockets
- Supports up to PC4-19200 (DDR4-2400)
- Supports 2 GB, 4 GB, and 8 GB DDR4 SODIMMs
- Supports up to 4 GB on 32-bit systems
note:
32-bit systems cannot address a full 4.0 GB of memory. - Supports up to 16 GB (unbuffered) with two 8 GB DIMMs on 64-bit systems
That mean you can add 8GB more to your machine. Your machine now can have (a) 2x4GB or (b) 1x8GB
- (a) You have to replace both sticks using compatible RAM such as Crucial 16GB (2x8GB) kit
- (b) You can add 8GB to slot 2 using compatible RAM such as Crucial 8GB stick
STORAGE: Yes you can upgrade to 1TB or 2TB using M.2 NVMe SSD such as Samsung 970 EVO Plus
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
HP Recommended
The series HP All-in-One PC 22-dd0000a (7WY46AV) has few models/products
https://support.hp.com/us-en/product/product-specs/hp-all-in-one-pc-22-dd0000a/model/38255860
But they use SAME MonkD motherboard.
https://support.hp.com/us-en/document/c06543675
which shows
Memory upgrade information
- Dual channel memory architecture
- Two DDR4 SODIMM (260-pin) sockets
- Supports up to PC4-19200 (DDR4-2400)
- Supports 2 GB, 4 GB, and 8 GB DDR4 SODIMMs
- Supports up to 4 GB on 32-bit systems
note:
32-bit systems cannot address a full 4.0 GB of memory. - Supports up to 16 GB (unbuffered) with two 8 GB DIMMs on 64-bit systems
That mean you can add 8GB more to your machine. Your machine now can have (a) 2x4GB or (b) 1x8GB
- (a) You have to replace both sticks using compatible RAM such as Crucial 16GB (2x8GB) kit
- (b) You can add 8GB to slot 2 using compatible RAM such as Crucial 8GB stick
STORAGE: Yes you can upgrade to 1TB or 2TB using M.2 NVMe SSD such as Samsung 970 EVO Plus
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community