cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
okman45
New member
1 0 0 0
Message 1 of 2
147
Flag Post

Solved!

upgraded ram and OEM from w8 to w10 now I cant activate virtualization in bios

HP Recommended
P2-1343w desktop
Microsoft Windows 10 (64-bit)

I upgraded the OEM windows 8 to windows 10 a couple of years ago no real problems .Now I upgraded the ram from (1x4gb) +(1x2gb) ddr3 to (1x8gb) +(1x8gb)ddr3 and when I enable virtualization in BIOS I get a BSOD and have to reset and disable virtualization in order for my system to boot normally . My question is there a way to activate virtualization without causing this problem ?

1 ACCEPTED SOLUTION

Accepted Solutions
old_geekster
Level 16
Level 16
25,273 18,899 2,921 9,296
Message 2 of 2
Flag Post
HP Recommended

@okman45 , welcome to the forum.

 

I believe that your problem may be caused by your new memory.  Here is the Product Specifications page: https://support.hp.com/us-en/product/hp-p2-1300-desktop-pc-series/5295976/model/5296935/document/c03...

 

If you look at the section titled "Memory/Memory upgrade information" it states that the maximum amount of memory in a 64-bit system is 8 GB.  You may want to test this theory by removing the stick of memory farthest from the processor.  Then, reset virtualization to see if it works.

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
old_geekster
Level 16
Level 16
25,273 18,899 2,921 9,296
Message 2 of 2
Flag Post
HP Recommended

@okman45 , welcome to the forum.

 

I believe that your problem may be caused by your new memory.  Here is the Product Specifications page: https://support.hp.com/us-en/product/hp-p2-1300-desktop-pc-series/5295976/model/5296935/document/c03...

 

If you look at the section titled "Memory/Memory upgrade information" it states that the maximum amount of memory in a 64-bit system is 8 GB.  You may want to test this theory by removing the stick of memory farthest from the processor.  Then, reset virtualization to see if it works.

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!

View solution in original post

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation