cancel
Showing results for 
Search instead for 
Did you mean: 
neootje2004
New member
1 0 0 0
Message 1 of 2
156
Flag Post

After a update HP my desktop is dead.

HP Recommended
HP Pavilion 590-po994nb 994 nb
Microsoft Windows 10 (64-bit)

I got a message on  my  screen  that  my pc would  be  restarted  after  an update from HP support. The pc  restarted but my monitor  stayed  black and my  desktop  started  beeping  several  times.  So that's  it, nothing happens  anymore. What can I do?

1 REPLY 1
Betty0610
HP Support Agent
HP Support Agent
16,128 16,110 858 700
Message 2 of 2
Flag Post
HP Recommended

@neootje2004

 

Welcome to the HP Support Community.

 

Let's perform a power reset as per HP standards:

 

Ensure your device is OFF.

Unplug all the external devices (If any).

Disconnect the power from the computer

Press and hold the power button for about 30 seconds.

Connect the power supply

Press the power button to turn on your device and check if the issue persists.

 

If the issue persists, after the above steps, try the below:

To recover an earlier version of the BIOS on your computer:

  1. Turn off the computer.

  2. With the computer off, press and hold the Windows key and the B key at the same time.

  3. Still pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows and B keys until the BIOS update screen displays or you hear a beeping sound (usually 8 beeps).

    NOTE: 

    If the key presses do not work, press and release the Power button, and then immediately, press the Windows and B keys at the same time, repeatedly, until the computer beeps or opens the BIOS update screen.

    The power LED light remains on, and the screen remains blank for about 40 seconds before anything displays on the monitor. You might also hear beeping sounds. Eventually, an HP BIOS Update screen displays and the BIOS update begins automatically.

    HP BIOS Update screen showing a progress indicator

    • If the HP BIOS Update screen displays proceed to the next step.

    • If the HP BIOS Update screen does not display, do one of the following depending on the condition:

    • Computer starts into Windows: The computer starts into Windows if the power button and keys are released too soon. Repeat the previous steps, holding the power button down for 2 or 3 seconds.

    • Power LED light turns off: The computer turns off if the power button is pressed and held down too long. Repeat the previous steps, holding the power button down for between 2 and 3 seconds.

    • After repeated attempts, the HP BIOS Update screen does not open: Your computer does not support this function or it has a hardware problem that is preventing the tool from opening.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 4 ONWARD

(By the end of this article all the issues should be resolved)

 

Let me know how that pans out.

 

If the information I've provided was helpful, give us some reinforcement by clicking the "Accept as solution" button, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!


I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation