cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
124
Flag Post

HP ENVY 750-630XT DT Start Up failure, stuck at "Choose an option" blue screen

HP Recommended
Microsoft Windows 10 (64-bit)

My less than two year old Envy750xt will not progress past the "Choose an option" blue screen. I have tried numerous, recommended fixes with no success. Live HP support is non-existent because the warranty is out. The computer did not come with a start up disk, and when I went to HPs ordering site, they want to charge $40 dollars (plus S&H) for something that should have been included originally. The computer crashed after the Windows 10 update (February 2020), so I am pretty sure it is a software problem and not my hard drive (the advanced diagnostics test said the drive was fine). 

 

I was reading you can go to Windows site and download the startup on a 10GB flash drive and then try booting up from the flash drive and I don't need to pay the ~$45 to HP. Does this sound right?

 

I have bought 4 HPs before (I have two currently, the broke Envy and an Omen), but the lack of a startup disk coupled with the lack of helpful customer support will probably make those my last two machines from them. I am very disappointed with HP and I am not going to spend money on something the company should have included in the first place.

 

Thanks in advance for any and all responses,

Junior65

1 REPLY 1
Highlighted
Level 20
Level 20
118,682 108,862 17,297 26,450
Message 2 of 2
Flag Post
HP Recommended

Hi:

 

Your PC should be supported by the HP cloud recovery tool.

 

Using another Windows PC and a 32 GB USB flash drive, you can create a bootable recovery drive with the cloud recovery tool that will reinstall W10, the drivers and the software that originally came with your PC.

 

Here is an info link for how to use that utility...

 

https://support.hp.com/us-en/document/c06162205

 

Yes, the other option would be to use the Microsoft media creation tool to create bootable W10 installation media.

 

https://www.microsoft.com/en-us/software-download/windows10

 

After W10 has completed installing you can install the drivers and available software from your PC's support page.

 

https://support.hp.com/us-en/drivers/selfservice/hp-envy-750-600-desktop-pc-series/17142191

 

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation