cancel
Showing results for 
Search instead for 
Did you mean: 
DipsK
New member
1 0 0 0
Message 1 of 2
3,431
Flag Post

I have a HP 27-n250na which does not fully shut down

HP Recommended
HP 27-n250na
Microsoft Windows 10 (64-bit)

For many months I a having issues with this all in one not fully powering down.  I have reset and tried all fixes and I still have no solution.  Many threads point to Intel Management Engine in sytems but mine does not show this and I dont have this available to change any settings.

 

1 REPLY 1
praveen196
HP Support Agent
HP Support Agent
10,488 10,491 471 748
Message 2 of 2
Flag Post
HP Recommended

@DipsK Welcome to HP Community!

 

I understand that the laptop will not fully shut down.

 

Don't worry I'll try to help you out.

 

Did you make any software or hardware changes on your laptop?

 

As you mentioned the issue still persists after trying out the steps.

 

Try the steps recommended below.

 

1. use windows key+x on your keyboard, to open device manager (you may use other means)
2. Locate system services and expand the trail
3. Locate and right click on "Intel (R) Management Engine Interface" then select Properties (or Just 
double click)
4. Select power management tap
5. And uncheck "Allow the computer to turn off this device to save power"
6. Save it and close it.

 

1. Turn off Fast Startup

2. Go to Control Panel > Power Options > Choose what the power button does and click on “Change settings that are currently unavailable" and Uncheck "Turn on Fast Startup"

3.uncheck “Power Management

4. Go to Control Panel > Device Manager > System Devices > Intel Management Engine Interface > Power Management and uncheck the “Allow the computer to turn off this device to save power” 

 

Try restoring the BIOS to default and check if it helps.

 

  1. Turn off the computer and wait five seconds.
  2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
  3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
  4. Press F10 to Save and Exit.
  5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
  6. Follow the prompts to restart your computer.

Also, try running a system diagnostics test on your PC and check if the hardware components on your PC are functioning correctly.

 

Refer to this article to know more information about running system diagnostics on your PC.

 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation