Pav all-in-one 23 pc does beeps and gives black screen when I start it on

[Yuuichiv]

When I start my Hp pavilion all-in-one 23-q102nl, it does 3 long beeps (1 second each on) and 3 short beeps, then it repeat the sequence 5 times. The screen appears black and every time it finisce the sequence I think it tries to start itself but fails. Everytime I presso the power butto, I hear some weird noises inside of it. Help

[Lil_Boy_Blue]

Hi

https://support.hp.com/us-en/document/bph07107

You get a LONG (MAJOR) signal category, RED LED &

then a SHORT (MINOR) signal category, WHITE LED.

Major – the category of the error; Minor – specific error in that category

The AUDIBLE repeats 5 times, and the VISUAL until power is removed.

Hardware

3.3

The embedded controller has timed out waiting for BIOS to return from graphics initialization. Indicates potential graphics chip failure.

For integrated configuration (I/C): 1 For I/C, confirm if graphics is on processor or Main-Board. 2 For I/C where graphics is on the CPU, swap known good processor. 3 For I/C, replace Main-Board and/or processor as appropriate. If the add-in card requires additional power, verify the cord is plugged in. For non-integrated configuration (N-I/C😞 1 Reseat card if able. 2 Test known good card if able. 3 Replace affected component.