Create an account on the HP Community to personalize your profile and ask a question
03-25-2022 11:53 AM
My computer is usually always on.. I hooked up a projector to use as a monitor and it has been working fine. I came in and turned the projector on and it was saying "no signal" which I thought was odd.. so I turned the computer off thinking maybe it was in sleep mode or something and I could hear sound,, but no signal. I turned the computer on and off a couple times and now I am stuck in "automatic repair mode" and my computer will not let me do a system restore, or anything to help fix this.. can anyone tell me what the problem is or what it could be? I have tried everything including changing the cmos battery which a friend had suggested.
03-29-2022 06:01 AM
Welcome to the HP Support Community! I'd like to help!
I see you are experiencing issues with the HP Notebook not booting to windows just stuck at repair screen.
The BIOS can be corrupted during normal operation from a failed BIOS upgrade, or damage from a virus.
Recover the BIOS using a key press combination.
Turn off the computer. Press and hold the Windows + b keys, and continue to press those keys while you press and hold the power button for 2 to 3 seconds. Release the power button, but continue pressing the Windows + b keys.
The power light remains on, and the screen remains blank for about 40 seconds before anything is displayed. You might hear a series of beeps (usually 8 beeps). Eventually, an HP BIOS Update screen is displayed and the BIOS update begins automatically.
NOTE: If the HP BIOS Update screen is not displayed, press and release the power button, and then immediately press the Windows + b keys at the same time, repeatedly, until the computer beeps or opens the HP BIOS Update screen.
After the BIOS is recovered, a Continue Startup button is displayed and a timer counts down. Click the Continue Startup button to restart the computer immediately, or wait for the computer to restart automatically when the timer reaches zero.
If issue still persist then test the hard drive using HP PC Hardware Diagnostics UEFI to rule out other hard drive issues
- Start or restart the computer.
- Press F2 repeatedly during start up to enter the HP PC Hardware Diagnostics UEFI utility.
- Select Component Tests > Hard Drive > Quick Test.
- Click Run Once.
Once the test completes, results are displayed on the screen.
If the drive passes all tests, continue to restore a computer back to the factory default, which will isolate whether it’s a software or hardware issue.
The HP Cloud Recovery Tool allows you to download recovery software to a USB drive. You can use the downloaded recovery image file in order to install the Windows operating system.
Click here for the HP Cloud Recovery Tool (Windows 10) link.
For any hardware issue or repair please click on the link Phone Assist Worldwide
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click on the YES button to reply that the response was helpful and/or to say “Thank You”.
Have a great day!
Didn't find what you were looking for? Ask the community