Having trouble signing in? Try this!
Post new question
Posts: 1
Member Since: ‎06-23-2016
Message 1 of 2 (143 Views)

m9260f had hard drives replaced long ago trying to restore with factory discs

Product Name: m9260f
Operating System: Microsoft Windows Vista (64-bit)

benn trying to do a factory rstore with factory discs get stuck at a black screen  calling maestro tues0/1/01/2002 maestro.cmn  started searching for user partition  then a administrator box apears on botton corner of screen also [Meastro.cmd] shows up help please tryed many 6imes with discs from hp  have made it thru to os but crashed when updating  top of black box select x:\windows\system\32\cmd.exe-startnet.cmd hope i put what info any body might need to help thanks  ouch 1952  ps the video card has been rmoved  a nivdia burned up over heated

0 Kudos
PhD Student
Posts: 750
Member Since: ‎01-02-2016
Message 2 of 2 (126 Views)

Re: m9260f had hard drives replaced long ago trying to restore with factory discs

[ Edited ]



You have two possible issues which are causing factory recovery problems:


1. Advanced Format HDD


2. A different graphics card


1. Your model number was introduced by HP in 2008. The newer HDD's throw the recovery discs into a frenzy. You may have to find a HDD that is not AF. Your system configuration shows two 500 GB HDD's were installed at the factory. Finding non AF HDD's may be a big problem.


You do have Vista SP1. So the possible HDD issue could be the size of the HDD you installed in your PC. Do you still have two 500 GB HDD's installed in your PC?


This HP PDF may help you.


2. Pull the new graphics card. Use the integrated graphics when performing the recovery. A different graphics card will kill a successful recovery.


One other option is to purchase Windows Vista SP1. Do a clean install.


Then install the HP drivers and software from here.



† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation