Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

Fan speed

HP Recommended
Omen 800-103nl
Microsoft Windows 10 (64-bit)
Hello yesterday I bought an Oman 800-103nl .. I have a problem the fan is too much noise with fan control I saw that the values ​​are 5000 rpm how do I reduce this annoying noise?
12,746 12,732 830 1,539
Message 2 of 2
Flag Post
HP Recommended



Welcome to HP Support Forums. 🙂 

Thank you for posting on HP Forums, MKazi is at your service. 


Congratulations on your purchase of the OMEN by HP Desktop PC - 880-103nl. 🙂


I read that the internal fan makes a loud noise. Not worry, I'll do my best to help you. 


Let me know if the PC overheats while trying to use it or play games.


Meanwhile, I recommend you to perform the following steps to isolate the issue and arrive at a fix: 


Updating your Notebook computer BIOS:

After computers are released, HP may distribute an updated BIOS to manage the fan, CPU power loads, and other components. To see if there is a newer BIOS update, you should determine what version of the BIOS is currently installed on your computer, and then determine if there is a more recent version available.

For complete information on finding your current BIOS version as well as instruction for updating your notebook computer BIOS, see Updating the BIOS (not for Android or ChromeOS devices).

Keeping notebook air vents clear and clean.

Electrical components inside the computer generate heat while the computer is running. This heat can increase to the point where sensitive electronic components are damaged.

When heat builds up, the fan spins faster to remove the excess heat and thus makes more noise. Notebook computers have vents in the bottom and sides to remove heat, allowing air to flow through the case. If the vents become blocked, the fan cannot cool the components properly (and must spin even faster). If there is dust in the vents, use a can of compressed air to blow dust out of the area inside vents. When the computer is turned on, place it on a hard, level surface keeping the vent areas unobstructed. Using your notebook computer on a cloth surface, such as your lap, a bed, or couch cushion, can block the air flow and cause overheating.

For more information see Reducing Heat Inside the PC (not for Android or ChromeOS devices).

Increasing the efficiency of the notebook to reduce heat.

If you have a lot of software open on your computer, your computer works harder and generates more heat. Reduce the amount of heat by increasing the efficiency of your computer.

  • Prevent software from starting when the computer is started.

  • Close software programs when you are done using them.

  • Log off the Internet when you are not actively browsing the Internet.

  • If your computer gets hot when playing games, try playing the game at a lower resolution and with decreased graphics settings.

Using Windows Task Manager to identify corrupt processes:

Consistent CPU load can cause heat buildup in the computer, forcing the fan to run continuously to keep the computer at operating temperatures. This heat buildup might be caused by corrupt software or malware. A corrupt process can consume CPU time anywhere between 1% and 100% of the CPU. Even a low but constant 3% to 4% load can cause the fan to run at a raised level.

Use the following steps to identify corrupt processes that might be consuming CPU time.

The screens vary slightly depending on your version of Windows. You will still see a Processes tab and CPU column.

  1. Close all open Programs and save your work.

  2. Press Ctrl, Alt, Delete, and then click Start Task Manager or Task Manager, depending on your version of Windows, to open Windows Task Manager.

    Figure : Opening Windows Task Manager

    Opening Windows Task Manager
  3. Select the Processes tab, and then to sort the processes by CPU load, click the CPU column header.

    Figure : Processes tab

    Processes tab with the CPU column header selected
  4. Look through the list for suspect processes.

  5. To find more information about a process, search the Internet using the process name that displays in the Windows Task Manager. Look for information that mentions the issue through other reports and suggests steps for resolving the issue.

Selecting power save settings to shut off your computer when it is not in use. Most operating systems allow you to change power settings. Use these settings to turn off the display when you are not actively using your computer. If you frequently leave your computer on when you leave it, then changing the power setting to turn off your monitor when it is not being used can help keep your computer running at a cooler temperature.


I genuinely hope the issue gets resolved without hassles and the unit works great. Feel free to keep me posted. I'll be glad to assist you further.


All the best! 🙂

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation