cancel
Showing results for 
Search instead for 
Did you mean: 
Ychavez
New member
1 0 0 0
Message 1 of 2
149
Flag Post

Missing HID Compliant Touch Screen

HP Recommended
Pavilion All in One
Microsoft Windows 10 (64-bit)

My touch screen stop working, I have try several online advices but all include to enable the HID Compliant Touch Screen but my destop is missing it. Can someone guide me on how to recover the drivers necessary.

1 REPLY 1
Jeet_singh
Retired
Retired
21,068 21,032 1,399 2,364
Message 2 of 2
Flag Post
HP Recommended

 

@Ychavez,

 

Thanks for engaging in HP support Forums! This is a wonderful location to converse with the community, get assistance and find tips! I understand the touchscreen isn't working, Don't worry I'll do my best to help you with this.

 

To provide you with an accurate solution, I'll need a few more details:

Could you provide me with the exact model of the PC? Use this link to find it:  https://support.hp.com/in-en/document/c03754824  (Ensure you do not share any of your personal information such as serial, phone number, email ID, etc...).

Did this happen after a recent software update?

Have you checked if the touchscreen works fine in Bios? 

 

In the meantime, let's try these steps here: 

 

Perform a Hard reset on the PC: 

Many startup errors and other problems can be resolved by decreasing the amount of power stored in hardware components. Decreasing stored power is sometimes referred to as a "Hard Reset". Use the following steps to perform a hard reset on a computer:

 

1. If Windows is open, click Start and then Shutdown.

If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.

2. With the power off, disconnect the power cord from the back of the computer.

3. With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.

4. Reconnect the power cord and turn on the power.

 

I would recommend you to check if the Touchscreen is responding on the BIOS by restarting the computer and tapping on the F10 key to gain access to the same (note that it's a confirmed hardware failure if the touch doesn't respond on BIOS) and you will need to contact the HP Phone support to set up a repair service (Free, if the computer is within the hp warranty).
 

If this works in the Bios, then this could be a possible software or driver conflict. 

 

For more details, please go through this support document for: HP PCs - Troubleshooting Touch Screen Issues (Windows 10, 😎

 

Alternatively, you can also visit this support link: HP PCs - Display and Touchscreen Troubleshooting

 

Could you please respond to this post with the details and with the results of the troubleshooting as this will help me in further assisting you.

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.

 

Jeet_Singh
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation