HP 23010m Connected to Laptop with HDMI and 1920x1080 display settings - image falls outside range

[seriouslyeee333]

HP 23010m is Connected to Laptop with HDMI and 1920x1080 display settings on the laptop, but the image falls outside range

[Riddle_Decipher]

@seriouslyeee333 Welcome to HP Community!

These messages are normal when the computer truly goes into sleep mode or loses the video signal (such as when the computer is turned off). However, if the monitor displays any of these messages when the computer should be displaying video, something is wrong.

If you suspect the monitor should be displaying an image from the PC instead of the message, use one of the following sections that match how the monitor behaves after the computer is powered on:

• Windows opens, but after a while the monitor displays the message

• Startup screens display, but the message opens before the Windows desktop opens

• The message is the only item that displays on the screen

Also, reduce the resolution of the laptop and then try again.

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[seriouslyeee333]

There is no message.  The image of my desktop is wider and longer than the display screen by about 1/2 an inch.  Even though the settings on the laptop are 1920x1080 and the settings on the monitor are 1920x1080.  I have no error message, just cannot work when I can't see the edges.

[Riddle_Decipher]

@seriouslyeee333 I suggest you try the below steps:
 

1. Open nvidia control panel

2. select under display tab "Adjust desktop size and position"

3. select size tab

4. tick box in section 2 "enable desktop resizing"

5. Click resize and move till the arrows look correct

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.