cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
Andreas90419
New member
2 1 0 0
Message 1 of 4
180
Flag Post

Solved!

HP Pavilion All-in-One - Display is only at approx. 1% brightness

HP Recommended
HP Pavilion All-in-One - 27-xa0055ng
Microsoft Windows 10 (64-bit)

The display of my Pavilion All-in-one 27xa0055ng didn't work anymore so I ordered an original spare part (new). I replaced the display and now I have the challenge that the new one is only at approx. 1% brightness. I can see schemes but not more. You can see that on the attached picture (internet-explorer can be guessed).

 

All the updates are done, all the hardware test are done (nothing) and all the different brightness-settings are at a max. I've also tried the hardware-reset but it didn't show any results. The computer itself works as everything is fine with an external monitor attached via hdmi. 

 

Any ideas of what else I can try or do? Thank you very much in advance!

 

IMG_7458.jpg

 

1 ACCEPTED SOLUTION

Accepted Solutions
iomare
Level 15
Level 15
12,360 9,616 2,455 4,611
Message 2 of 4
Flag Post
HP Recommended

Hi,

Is the backlight connector attached correctly

iomare_0-1623665186887.png

You see, I would say a problem with the backlight, either the connection, cable, or display itself.

 

Hope it helps,

David

 

View solution in original post

Was this reply helpful? Yes No
3 REPLIES 3
iomare
Level 15
Level 15
12,360 9,616 2,455 4,611
Message 2 of 4
Flag Post
HP Recommended

Hi,

Is the backlight connector attached correctly

iomare_0-1623665186887.png

You see, I would say a problem with the backlight, either the connection, cable, or display itself.

 

Hope it helps,

David

 

View solution in original post

Was this reply helpful? Yes No
Andreas90419
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Hey David - you literally made my day! That's been the solution... Just forgot to connect the backlight (cable sliped somewhere beneth). Awesome!

 

Thank you so much! 🙂

Was this reply helpful? Yes No
iomare
Level 15
Level 15
12,360 9,616 2,455 4,611
Message 4 of 4
Flag Post
HP Recommended

You're welcome.

Glad you have the machine running again.

 

Take care,

David

 

https://www.youtube.com/watch?v=O3sXlRZxPRY

 

In a breakthrough collaboration that crosses continents, Z by HP brought seven artists together to do something they've never done before and push the bounda...
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation