cancel
Showing results for 
Search instead for 
Did you mean: 
sdubs
New member
2 0 0 0
Message 1 of 2
195
Flag Post

HP Pavillion 24 Touch Screen is not working anymore.

HP Recommended
X6F62AA#ABA - Model24-b114
Microsoft Windows 10 (64-bit)

I noticed one day that the touchscreen on this computer was not working anymore. probably after a windows update.  I've read up on the HID Comliant Touch Screen enable/disable fix but the HID compliant touch screen is not even listed in device manager. 

 

This is so frustrating. How do I get this touchscreen working again?

1 REPLY 1
Hibb1
Level 6
472 472 38 88
Message 2 of 2
Flag Post
HP Recommended

1. Run the F2 diagnostics (Tap F2 on boot) and go to component tests, Touch Screen.

2. If the Touch Tests Pass, Then it's a Windows issue, and you'll either need to load a previous restore point, or do a full F11 factory restore.

3. If the Touch Tests fail or Touch Screen is NOT THERE as an option, then the TS is faulty. OR you could go into BIOS (F10 on boot) and go to the security tab and make sure INTERNAL USB PORTS is ENABLED. If they're disabled, the TS will not be seen.

Hope this helps.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation