cancel
Showing results for 
Search instead for 
Did you mean: 
Oploskoffie
New member
1 0 0 0
Message 1 of 1
132
Flag Post

HP Thin Pro 7.1.0 Display Issues at startup

HP Recommended
HP Thin Pro 7.1.0
Other

Hi there,

 

We have a bunch of people that use thin clients in a dual screen configuration, but I found the following behavior which makes using thin pro very confusing for our users.

 

We use a dual monitor setup connected to the thin clients using displayport cables. After configuring the extended screen settings, and defining the main display, and saving this. I have found that if you power cycle the main display, this triggers thinpro to reset the configured display settings back to default (it goes to mirrored mode).

 

What could be the cause of this problem? Why isn't the saved configuration maintained and how could I fix that?

 

Thanks in advance.

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation