cancel
Showing results for 
Search instead for 
Did you mean: 
Coyote717
New member
1 0 0 0
Message 1 of 1
118
Flag Post

Hp 23es Monitor Broken Power Receptacle Replacement

HP Recommended
HP 23es

Hello all!

 

I recently got HP23es monitor from my friends sister. She put it too close to the wall, and the center conductor in the P3 Power receptacle broke. After Dissasembling i found this. I tried to re solder another pin on the previously explained dc power jack, it flowed and now would most likely short with another Pin. I am looking for the part number for a new power jack i can solder in its place.

 

so far the closest things ive found are Kycon KLDX jacks (and the original jack is marked KY) but none i found fit the description. 

 

the AC adapter uses 19V at 1.58 amps max. i believe the barrel connector is 5.5 mm * 2.5mm.

 

Thanks so much in advance!

 

IMG_20200902_192220122.jpgIMG_20200902_192231049.jpgIMG_20200902_192237758.jpgIMG_20200902_192247483.jpgIMG_20200903_175015881.jpg

Tags (1)
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation