cancel
Showing results for 
Search instead for 
Did you mean: 
Little_girl07
New member
1 0 0 0
Message 1 of 2
127
Flag Post

I have an HP officejet pro 8600 i turn it on the screen doesn’t work the only light on is the ?

HP Recommended
Cm749a

Hp officejet pro 8600 the screen doesn’t work please help me asap

Tags (1)
1 REPLY 1
Betty0610
HP Support Agent
HP Support Agent
16,205 16,187 871 708
Message 2 of 2
Flag Post
HP Recommended

@Little_girl07

 

Welcome to the HP Support Community.

 

Let's try to reset the Printer here:

 

Turn the printer on, if it is not already on.

  1. Wait until the printer is idle and silent before you continue.
  2. With the printer turned on, disconnect the power cord from the rear of the printer.
  3. Unplug the power cord from the wall outlet.
  4. Wait at least 60 seconds.
  5. Plug the power cord back into the wall outlet.
  6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed.

If the issue persists, I recommend you to contact the HP Support Team as this could be a hardware issue.

 

Link: www.hp.com/contacthp/

 

Note:  Select the country accordingly to get the contact details for support.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!

 

 


I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation