cancel
Showing results for 
Search instead for 
Did you mean: 
Raj109
New member
1 0 0 0
Message 1 of 2
160
Flag Post

Turning on laptop

HP Recommended
K8U06A#ACJ
Microsoft Windows 10 (64-bit)

When I push power  button the power indicator blink one and gets off and no display on the screen 

When I eject battery and reinsert it gets on only

Plzzzzzzz help me out 

1 REPLY 1
Lil_Boy_Blue
Level 12
7,692 7,654 332 706
Message 2 of 2
Flag Post
HP Recommended

Hi
PLEASE POST ANY RESULTS.
First:- Turn off the computer, press and hold the PWR button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat; Re-Connect the AC adapter.

NOW begin checking/testing/proving the Hardware is fit for purpose.
Power on your PC, press ESC (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).
AND/OR
HOW DO I USE DIAGNOSTICS?

HP PC Hardware Diagnostics is a Windows-based utility that allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The tool runs within the Windows operating system in order to diagnose hardware failures. HP PC Hardware Diagnostics Windows comes pre-installed on new HP computers, but if not on yours, download here:-
https://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html

 

HWT B D W.png

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation