my screen goes black for 2-3 seconds.

[ricanrock]

my screen will go black for 2-3 seconds then come back.  IT does this all the time.  Is this normal

[Riddle_Decipher]

@ricanrock Here's what you need to do, to identify the issue and resolve it accordingly:

• If not done already, check if it works fine on the BIOS screen to identify if it's either a hardware or a software issue:
  • If it works fine on the BIOS (Accessed while tapping F10 during a restart) it's a software issue & I suggest creating a new user account to check if that works better, for starters)
  • However, if it doesn't work within the BIOS either, I'm afraid it's a hardware malfunction.

While you respond to that, I have a few more steps that should help: 

Perform a power reset (no data loss) using these steps: Click here, proceed to next step if this works

Attempt to run a test from the HP hardware diagnostic tool, using this link: Click here for details.

If the issue appears on the diagnostics, it could again, determine a hardware failure,

If they don't appear on bios & the hardware tests passed: please update the BIOS & Chip-set drivers from the HP website using this link: Click here

if the issue persists, reinstall windows using the recovery partition or the recovery media to fix the issue,
use this link for details on performing the recovery: Click here

P.S: Welcome to HP Community 😉

Keep me posted, as I (Or a trusted colleague) shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, only in case you don't get back to us, first! 

That said, If the information I've provided was helpful, give us some reinforcement by clicking the solution and kudos buttons, 

That'll help us, and others see that we've got the answers!

Good Luck.