cancel
Showing results for 
Search instead for 
Did you mean: 
CaptBob1
New member
1 0 0 0
Message 1 of 2
417
Flag Post

Error OXC7390535

HP Recommended
HP Deskjet 3050
Microsoft Windows 7 (32-bit)

When trying to print, I get the error OXC7390535. Does this mean that the carriage is jammed? It keeps clicking and producing the error.

1 REPLY 1
Jeet_singh
Retired
Retired
21,068 21,032 1,398 2,343
Message 2 of 2
Flag Post
HP Recommended

Hi @CaptBob1,

 

Thank you for showing your interest in HP Support Forums. It is a great place to find the help you need, from other users, HP experts, and other support personnel. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for the First Time Here? Learn How to Post and More.

 

I see from the post that you are getting a '0x' error message on your HP DeskJet printer. Don't worry as I have a few steps which should help you resolve this issue.

 

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any changes on the printer before the issue started?

Have you tried to clean the cartridge contacts as well as clean the rollers?

Are you able to move the carriage manually?

 

In the meantime, let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now insert the ink cartridges and then try to print a test page and check if it works.

 

Next thing, I would suggest here is to follow the steps suggested in the support document for - HP Printers - Resolving Printhead Problems and Ink System Failure

 

If you have followed the steps suggested and still having the issue, I would suggest this could be a printer hardware. I would recommend you contact our HP phone support for available service options. If your product is out of warranty, please don't forget to choose the paid options to get the tech support number.

 

Please use the following link to create yourself a case number, then call and it may help speed up the call process:

Step 1. Open link: www.hp.com/contacthp/

Step 2. Enter Product number or select to auto detect

Step 3. Scroll down to "Still need help? Complete the form to select your contact options"

Step 4. Scroll down and click: HP contact options - click on Get phone numberCase number and phone number appear.

They will be happy to assist you immediately.

 

Keep me posted for any other assistance

Feel free to post your query for any other assistance as well,

It's been a pleasure interacting with you and I hope you have a good day ahead.

 

Regards,

,

Jeet_Singh
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation