• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
HP 440 G6 AIO
Microsoft Windows 10 (64-bit)

We have 47 new HP 440 G6 AIO to be deployed via our SCCM 2012R2 server onto the network.

 

The issue is that the Units will initially PXE boot, goes past F12,  loads the install PXE over Ipv4, connects to the server,  loads the WIM,  shows our default SCCM screen,  Then flashes up "Protected by HP Sure Start"  then goes back to our SCCM screen and reboots the PC.

 

The PXE fails,     tried all I can think of to get this working, downloaded drivers, rebuilt the task, plethra of other things.

There is nothing in the BIOS to seems obvious, and that it's partially PXE booting leads me to believe this was a driver issue, but all attempts to resolve this using the  HP drivers for these (i219) have failed,  it seems the i219 will not import or rather it shows as the i217.

 

Does anyone have any insight or advice to give at this stage?

 

Thanks in advance

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.