WANT TO CHANGE FROM WiFi to Ethernet CAT5 for internet

[unltdycht]

I would like to use the Ethernet (CAT5 plug ) instead of WiFi to connect directly to a broadcom router to increase speed and cannot find a driver or way to switch

[Dragon-Fur]

@unltdycht 

Select your product:

• HP ENVY 700-100 Desktop PC series
• HP ENVY 700-400 Desktop PC series
• HP ENVY 700-000 Desktop PC series
• HP ENVY 700-300 Desktop PC series
• HP ENVY 700-500 Desktop PC series
• HP ENVY 700-200 Desktop PC series

Open Category Product Information > Topic Specifications

Select your model from the list

Open the Specifications document

Scroll down to section I/O Ports

Open section Back I/O Ports

Examine the illustration to find the Ethernet (LAN) port

Example

HP ENVY 700-100 Desktop PC series - Product Information

If the Ethernet / LAN port is available on your computer, it will look similar to the illustration.

Figure : Back I/O ports

1. Optical S/PDIF-out port
2. LAN
3. USB 2.0: 2
4. USB 3.0: 2
5. DVI-D
6. DVI-I
7. Audio: center/subwoofer
8. Audio: rear speaker out
9. Audio: side speaker out
10. Audio: Line in
11. Audio: Line out
12. Audio: Microphone

Example

Troubleshooting and Maintenance Guide

If your computer can be (has been) connected to an Ethernet cable > router,

then

See the instructions on Page 5

No Ethernet port?

Consider an Ethernet adapter.

What is an Ethernet Adapter?

Thank you for participating in the HP Community Forum.

We are a world community of HP enthusiasts dedicated to supporting HP technology.

Click Thumbs Up on a post to say Thank You!

Answered? Click post "Accept as Solution" to help others find it.

[banhien]

@unltdycht 

Sorry, I did not know you have 2 posts

Regards.