The HP Community is here for you.
01-01-2014 10:19 PM
I have a HP Pavilion P6716F. It currently has a 1TB hard drive (HD#1). I want to add a second 2TB hard drive (HD#2).
I have a SATA connector cable but need to know which SATA port on the Alvorix RS880 to plug it into. There is a white SATA P2 next to a blue SATA P1 that the current hard drive (HD#1) is connected to. Is SATA P2 the correct port to plug the second drive (HD#2) into?
Do I have to supply power to the second drive? If so, it appears that there are spare connectors that could be used. One of them is close by the power supply for hard drive #1. HD#1 is connected to a connector marked P4. Connector P4 is split (siamesed) to another identical connector marked P5. Should the second hard drive (HD#2) be plugged into this connector?
Solved! View Solution.
Re: Adding a second hard drive
01-04-2014 09:56 AM
worked like a charm. thanks a bunch.
01-02-2014 03:11 PM
you need connect data and power cable to HDD. SATA cable should be connected into the mentioned SATA P2 with white colour. Power cable can be found as a free connector from PSU.
Power off the computer, unplug power cable. Mount HDD, plug in SATA cable to board SATA P2 and HDD connector, plug into HDD power input from power suply.
Plug in power cord, start up computer -> in win there should be installed new HW
01-02-2014 05:16 PM
Thank you for your quick reply. I knew i had to plug in the SATA cable but wasn't sure about the power cable.
What is a PSU?
And is it one of the split connectors off the power cable i had mentioned?