Ask questions. Help others.
The HP Community is here for you.
Post new question
Question
Reply
 
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Honor Student
Posts: 2
Member Since: ‎03-10-2014
Message 1 of 4 (1,009 Views)

Aftermarket coolers compatible with the Hp Pavilion h8 1220 (or the h8 series in general)

[ Edited ]

Hi,

 

I have an HP Pavilion h8-1220 that I use in an office setting. Very happy with the computer in general except that they system is very noisy. This hasn't been a problem up till now, but my office mate happens to be very sensitve to the sound. This particular computer is quiet when idle, but whenever it is doing heavy computations, the tiny stock CPU cooler revs its fan to a surprisingly loud maximum . 

 

I have seen that this is a common complaint, but nobody seems to talk about low noise aftermarket coolers. I have no problem installing an aftermarket cooler (I normally build my own PCs), but I don't know which coolers will fit inside the case and on the board and I don't have an extensive repository of coolers available to test.

 

Has anyone done this or can anyone (from HP?) offer advice about what size/brand cooler might fit (e.g. a zalman CNPS9500A).

0 Kudos
Provost
Posts: 26,687
Member Since: ‎07-17-2009
Message 2 of 4 (994 Views)

Re: Aftermarket coolers compatible with the Hp Pavilion h8 1220 (or the h8 series in general)

[ Edited ]

Hi,

 

Someone in the past posted a similar question about a heat sink and ended up installing what looked to be a low profile cooler due to the limited width of the HP cabinet.

 

I suggest that you do some measuring from the base of the existing CPU heat sink/fan to the inner edge of the side panel.  Once you are armed with this information then contact Cooler Master.  I would suggest that you consider a heat sink that can dissipate 125 watts. Some of the aftermarket coolers do require a backing plate. That would require the removal of the motherboard. Another possible issue is the bolt pattern and clearance for the aftermarket cooler.

HP laptop 17t u100,
HP Photosmart 6520 and HP Deskjet 1112
Custom 1151 socket Z270 Intel i7-7700k @4,600 Mhz, 16GB Corsair 3000 Mhz dimms
Corsair H75 water cooler, Corsair CS 650M power supply
RAID 0 (dual Samsung 960 EVO m.2 240GB) boot system
Dual Samsung 840 EVO SSDs 500GB data storage, Intel 750 PCIe SSD 400GB
MSI NVIDIA GTX 980TI 6GB
ASUS ROG PG279q @144 MHz
Windows 10 and Windows 8.1 Pro x64 in UEFI mode
Teacher
Posts: 92
Member Since: ‎11-17-2008
Message 3 of 4 (986 Views)

Re: Aftermarket coolers compatible with the Hp Pavilion h8 1220 (or the h8 series in general)

[ Edited ]

Arctic makes great products. Since your processor has a TDP: 95W and with not much room I would suggest the Alpine  64 Plus  @ TDP: 100W.

 

http://www.arctic.ac/us_en/products/cooling/cpu.html?cpu_socket_amd=98

HP Blackbird 002 - Asus Maximus VI Hero - i7 4770k - Corsair H100i - Samsung 840 Pro SSD's in Raid 0 - WD Velociraptor x2 - 16 gb Corsair Vengeance Pro 2400 Mhz - eVGA GTX 580 - Corsair AXi 1200 kw PSU - Windows 10 Pro 64
Highlighted
Honor Student
Posts: 2
Member Since: ‎03-10-2014
Message 4 of 4 (936 Views)

Re: Aftermarket coolers compatible with the Hp Pavilion h8 1220 (or the h8 series in general)

I decided to go with a CoolerMaster Vortex Plus.

 

I will mention a couple of details about the installation:

 

1. The AMD part of the kit that came with the cooler was designed to interact with some standard AMD mount that was expected to be already installed on the mobo. In the h8-1220, this mount was not present, so the AMD mounting hardware was useless.

 

2. The intel processor brackets provided were adjustable, and the configuration for 1155 socket intel processors nicely spanned the screw holes around the fx8100.

 

3. The fastners included with the intel brackets were far too large to be used in the threaded holes in this mobo. I had to go to Ace Hardware, buy (for the exorbitant price of $1.50) 4 machine screws of the correct thread and 4 1/8 inch thick nylon washers, and  to appropriately secure the brackets.

 


The result is a blissfully quiet machine.

 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation