Ask questions. Help others.
The HP Community is here for you.
Post new question
Question
Reply
 
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Honor Student
Posts: 4
Member Since: ‎07-11-2012
Message 1 of 2 (626 Views)

B2600 FX5 Garbled Text slot 3

I have a B2600 with an FX5 graphics card in slot 3.  I installed HPUX 10.2.  

 

The text output is garbled in the blue areas of the welcome screen.  I have swapped both the I/O cage and FX5 graphics card and still have garbled text in the blue areas.  If I move the FX5 card to another slot (slot 4) the text output is normal.  Does this mean there is an issue with the system board?  Is there a fix for this?

0 Kudos
Highlighted
Tutor
Posts: 13
Member Since: ‎06-26-2001
Message 2 of 2 (617 Views)

Re: B2600 FX5 Garbled Text slot 3

The PCI card cage only contains the slots.  Its the motherboard that contains the PCI bridge and I/O controllers.  Likely its the local bus adapter for that particular slot that is causing the issues.

 

However, slot 4 is just as capable as slot 3, so if you are not using the slot 4, just move the card over.

 

-Bob

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation