The HP Community is here for you.
01-03-2009 08:56 AM
Hello there, I've had some overheating beeping codes before and my system was taken to repair and had the CPU Replaced (i think motherboard too can't remember. When it was back i had extremely high fan noise when i was playing a game like World of Warcraft / Team Fortress 2 / Counter strike source and so on.. So i called them up again and they took it to repair again and it was back with Gfx Card & Accessories replaced, Still the same problem so i called them again and it was taken for ONE MONTH and when i called them up again they told me that it was because i had third party ram in there (1GB installed by the store i purchased the system from) So i removed the ram and it still gave me errors and this time when i called them up they told me that this time they will replace the Motherboard + CPU + Fan and that this will fix the problem and if it doesn't, it will be taken 1 step further.
Anyway, i was wondering if anybody here knew any idea why this might happen because i am afraid very much it might take a while again for me to receive the computer but if theres anything i can do that won't cost me anything i should do it!
I have cleaned all fans inside and checked fans are working perfectly.
When i ALT TAB from game cpu calms down.
CPU Goes to 65C (sometimes more) when playing game
CPU when not playing games and a few apps open is 40C Average
When there is like loads of applications or when game thats the fan going crazy to 4000RPM/5000RPM
HP Media Center PC M8080.uk-a
E6700 @ 2.66Ghz
Radeon X1700 SE
Anybody please i will appreciate some help very much!
02-13-2010 09:11 AM
Did you put heat sink compound between the heatsink and cpu to allow heat transfer? It is available at Radio Shack. Without this the fan will run on high. This happened to me before.
02-14-2010 02:39 AM
Hi, I think you know the problem, CPU getting hot, fan controller increases the fan speed in an attempt to cool the system down. I do not know where the issue with the 3rd Party RAM came from, since that will not effect CPU temperatures. To be honest I do not know why the fan is RPM'ing so high, 60Deg C on full load is not unusual.
There is nothing you can do but keep returning it to HP for them to fix, since anything you try and do will void the warranty [i.e. re-seat the fan with a descent thermal compound [Artic Silver] and/or Replace the heat Sink all together and/or replace the fan. There are a number of third party heatsinks/fans available [its a big market..Literally 100's out there but only a few really good ones].
Usually systems do not such down under thermal constraints until the proc. temp. is about 100DegC [Tj Max]
To avoid warranty issues though I would recommend you get back to HP, tell them your not happy and would like a new PC [given the grief it has caused].
Good Luck......Nothing more frustrating having to deal with PC manufactures, they just do not seem to understand the aggravation and inconvenience of having to keep shipping the thing back and forth
02-27-2012 10:05 AM
first: replacing the cpu and motherboard alone makes no sense, if you do that than replacing the whole thing is easier.
second: why do you want to lower that rpm
third: if you don't want noise, and don't want the cpu to over heat than get liquid cooling of course there cons ex: you have to replace the, and add every once in a while
you have to use special fluid [but you can make it(google it)]
google it more
fourth: forget the store if you have a problem google it and fix it yourself because the store will do bonehead moves lik replcing the cpu!!! and charge a fortune!! only use it as a last resort or when you don't know what to do and afraid of ruining it
fifth: check out AMD for your next build