Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
Bejje Honor Student
Honor Student
2 0 0 0
Message 1 of 1
243
Flag Post
HP Recommended

Change values for HP Velocity in ThinPRO

ThinClient T520
Linux

At our company, we use mostly HP ThinClients with ThinPro operating system which comes with HP Velocity software.

 

This software is a pain for us since we are using VoIP client in ThinPro and HP Velocity make changes in the packets sent over the network which makes the VoiP client not able to login to the server.

 

Turning off HP Velocity solves this for most of the time, but somehow, even if it's turned off, something is not completely off regarding Velocity which sometimes still changes the header of the  packages thus making VoIP impossible.

 

I have googled this alot and found out that there is something called "IP Option Beacon" that does this.

In ThinPRO there is an option called ipOptionMark=1 in a file related to Velocity that can be changed to =0 that solves this.

On page 37-38 in the Velocity manual this is explained.

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04867252-1.pdf

 

 

I have done what is written there and it works fine and solves our problem, but as stated on page 37 as a note, setting in that file in that location is wiped after reboot which is totally correct, but no where in the manual is there any mention of how to make this change permanent.

 

Can anyone please help out with this?

 

// David

0 Kudos

Note on archived topics.

This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation