Note on archived topics.
12-23-2013 07:38 PM
I have a Formosa Motherboard in an hpe h8 1220t. The motherboard specifys it supports pc3 12800 1600mhz RAM however, I have installed Gskill RAM with the above mentioned specs and it is showing up at a speed of 1333mhz.
is there anywhere in the BIOS I can configure this that I am not noticing?
Solved! Go to Solution.
12-23-2013 07:52 PM
NO, you didn't miss any BIOS setings. Please indicate the amount and full configuration of RAM on your computer.
The RAM speed automatically is configured based on the RAM SPD and RAM population. You may try using one stick of GSkill 1600MHz only and see what speed the BIOS reports. If this reports 1600... add another stick and repeat. If using mixed memory modules, the computer usually select the the slower common speed.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
***** Please click the "White Kudos" Thumbs Up to say THANKS for helping *****
***** Please click the "Accept As Solution" on my post, if my help solved your issue *****
***** This is a user supported forum. I am a volunteer and I don't work for HP *****
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
HP ENVY x360 m6-w103dx - Windows 10, 8GB RAM, Intel HD 520
12-23-2013 08:25 PM
The Formosa motherboard can run either the Intel Sandy Bridge or Ivy Bridge processors. If your PC has the Intel Sandy Bridge processor then 1333 is all that you will see. If you are running the Intel Ivy Bridge processor then all of the dimms need to be 1600 mhz dimms (same CAS required) to ensure that the dimms will bind up at the maximum speed rating.
Custom motherboards will allow faster speeds with dimms using XMP but typically the faster speeds are over clocking the dimms. Even without using XMP faster speeds can be obtained using manual timing and voltage adjustments. HP doesn't give consumer motherboards over clocking choices except in rare occasions.
HP Envy 17", i7-8550u,16GB, 512GB NVMe, 4K screen, Windows 10 x64
Custom PC - Z390, i7-9700K, 32GB, dual 512 GB NVMe, dual 512 SSDs, 2K screen, OC'd to 5 Ghz, NVIDIA 2080TI 11GB