Ask questions. Help others.
The HP Community is here for you.
Post new question
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Honor Student
Posts: 3
Member Since: ‎08-22-2013
Message 1 of 3 (604 Views)

HP 2011x Monitor


I have an Acer Aspire X3470 Desktop Windows 7 64-bit. (AMD A6-3620 APU with Radeon HD Graphics)

The computer came with an AMD VISION Engine Control Center..

I just put this new monitor in last night. 

Device Manager lists this as: HP 2011 Series Wide LCD Monitor. Location:

On AMD Radon HD 6530D.

I know Windows update came with a driver but what I see listed is:

First: C:\Windows\system32\DRIVERS\monitor.sys

then underneath:

on top of the vision control center. 


The Resolution is at 1600x900 recommended!


I am going a little blind here today..

and I need to know if I should uninstall the control center or how

to turn down the display..??? Anything!




0 Kudos
Posts: 111
Member Since: ‎05-13-2013
Message 2 of 3 (585 Views)

Re: HP 2011x Monitor

If your resolution is 1600x900, your screen is at the default recommended resolution. If the print is too small for you and you need a smaller resolution, you can set the screen to a smaller resolution by going to the Display control panel.

Go to Start Menu > Control Panel. In the upper-right corner of the Control Panel window, where it says "View by:" select "Large Icons" if it's not already selected. Now open "Display".

To adjust scaling: From this screen, select "Medium" or "Large" and click Apply. Note that some programs, however, may not be properly designed for content scaling and may have visual issues at any size aside 100%. The upside is, however, that you maintain using the optimal 1600x900 screen resolution, providing best fidelity of picture.

To adjust resolution: On the left hand side, click "Adjust Resolution" and you can adjust the resolution from there to a lower resolution. The downside to resolution scaling is slight loss of picture fidelity and overall workspace size shrinking, but the upside is that almost any program can scale resolution with no visual problems.
Honor Student
Posts: 3
Member Since: ‎08-22-2013
Message 3 of 3 (549 Views)

Re: HP 2011x Monitor


Please excuse the wait.


Doing a restore back to factory settings seems to have helped.


Q: Is it normal for a PC with the  AMD Vision Control Center to reject the HP Monitor Driver?


I have also been experiencing another issue with this Monitor which I will make a new post about.

Thank you for all you help.




† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation