Ask questions. Help others.
The HP Community is here for you.
Post new question
Question
Reply
 
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Student
Posts: 1
Member Since: ‎01-22-2011
Message 1 of 6 (1,000 Views)

HP Health Analysis and Tune up

My HP Health Analysis assistance isn't working properly as when it gets to 'Analyzing your system' it gets stuck. It has been 10 hour since i started it and been stuck at that same point. also same with Tune Up it gets stuck on 'Analyze the computer for hardware and software issues.' I believe it could be a problem with HP Support Assistance not sure though. i was wondering if you could help. Thanks!

0 Kudos
Provost
Posts: 18,126
Member Since: ‎11-21-2008
Message 2 of 6 (971 Views)

Re: HP Health Analysis and Tune up

Bobby, what is the make/model of the computer.  This information will allow us to access the Product Specifications for the computer.

-----------------------------------------
Signature:

HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)

HP Omen X; i7-6700K; 16 GB DDR4 2133; GTX 1070; 256 GB SSD M.2; Win 10 Home

HP Photosmart 7520 AIO


++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**

Intelligence is God given; Wisdom is the sum of our mistakes!

___________________________
I am not an HP employee.
Student
Posts: 1
Member Since: ‎02-03-2011
Message 3 of 6 (885 Views)

Re: HP Health Analysis and Tune up

I am having the same problem but i seem to have a bit TOO MUCH patience cause the 'analyze computer for hardware and software issues' has been going on for around 2 days now... really hoping that there is a way so solve this please....

Honor Student
Posts: 2
Member Since: ‎05-24-2011
Message 4 of 6 (733 Views)

Re: HP Health Analysis and Tune up

Same issue here. I have a dv7 3085dx. The functionality of the touch controls above the keyboard went out. "Analyze the computer for hardware and software issues" has been running for about a day now. 

Provost
Posts: 37,870
Member Since: ‎11-12-2008
Message 5 of 6 (729 Views)

Re: HP Health Analysis and Tune up

@Geobot

 

Try a hard reset, works sometimes.Disconnect all external devices first.

1-remove power cord and battery

2-press power button for 20 seconds

3-reinstall only power cord for first startup.

4-power on

**Click Accept as Solution on a Reply that solves your issue to help others**
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
Honor Student
Posts: 2
Member Since: ‎05-24-2011
Message 6 of 6 (726 Views)

Re: HP Health Analysis and Tune up

No change on either issue

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation