The HP Community is here for you.
11-09-2010 12:15 PM
So, I bought my 320 gb HP Simplesave portable about a year ago, It's always worked! and I have saved about 23 GB worth of media on it, And as it usually starts up as soon as its plugged, Today...I plug it in, and it does NOTHING! This is a tragedy! I am a professional video creator and now I don't have my media? What to do?????
I plug it in and I click on , start>computer and usually it says "HP Simplesave" under my standard drives ((local disc c and presario rp-d)) And now it says "DVD RW Drive (E)" I dunno if that was there before...But I know my Simplesave isn't working!!
Not sure if this makes a difference...but, In the past,like when I first bought it, I dropped it from a short range,and about 3 months ago,I was getting it out of my drawer and it fell,on my carpet floor...And today it fell on my carpet floor...
What is wrong?
((Please, I cannot take solutions that require me to completely start a-new with this drive!))
11-09-2010 12:34 PM
Try plugging it in to a different USB port on your PC. Then from the Start Menu, click the Control Panel, open Administrative Tools, Computer Management, Storage and then Disk Management. Does the drive show up here?
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Windows Insider MVP
11-09-2010 01:17 PM
The fall has either damaged your hard drive mechanism, or the circuit board connection. The only way to determine is to put your ear to the case, and power up the drive.
1) Drive is spinning with (a) whirling sound, (b) whirling then a thud/click, (c) constant thuds/clicks? Only "a" is good.
2) If not (a), unplug the power, and open the case, and check adapter on the 2.5" hard drive. It slides on, make sure it's fully seated onto the drive.
Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..
Loaner: Envy Omen Windows 10 Pro 64 bit 4th Gen Intel(R) Core(TM) i7-7700HQ + NVIDIA GeForce GTX 1070M 8GB Discrete Graphics (16GB RAM) 512GB m.2 SSD
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro, 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 8GB, 500GB HD SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and OCZ 750W.
Printer -- HP OfficeJet Pro 8620
11-09-2010 01:40 PM
Hello, wb2001...Ummm...I did that..and sounds like (b) not sure though...Definately not A in my opinion.
And ...I don't understand...How did that minor fall damage??
And when I open the case, what do i do? You said "check" the adapter on the 2.5 hard drive...And it slides on? And what if it is not fully seated onto the drive? Can i fix that?
There HAS to be some way I can get my files back!!!
Thanks for your help.
11-09-2010 04:16 PM
First of all, the way the SimpleSave drive and system operates is based on the use of the Windows Autorun feature. As soon as the drive is recognized by the operating system, it looks for an Autorun file at the root of the drive -- if it finds one, it tried to follow the instructions in the Autorun file.
It appears that your system is seeing some kind of a drive, but is not sure what kind of a drive it is. In order to see what is on your drive -- if it works at all, I would suggest first going into your operating system and disabling the Autorun feature for that drive. That makes it easier to look at the drive contents without the system trying to do things with the data.
Assuming that Drive "E is the one assigned to your Simplesave:
That way, your system will not try to execute the SiumpleSave Autorun file.
Stop the drive using the "Safely Remove Hardware" icon in your system tray, unplug it from the USB prot and unplug the power.
Then, power it back on, plug it into the USB port and you should see the disk as it normally would look without the overhead of the SimpleSave software. That should tell you if the drive is working.
11-09-2010 05:44 PM
When i first got the simplesave it was (:F) drive, then it changed to (:G) in june 2010 ,i think.
And i don't think it works,and i think drive E has always been there, perhaps...I contacted the store where i bought it from(Best Buy), they say for $150 they'll transfer my stuff off there and put it into a new hard drive,which is an additional 90 dollars.
They also said, they can open the case for me and see if theres any problem..for free,i take it.
So until I figure out if that'll work..I suppose I can't try anything else...
But, still, More suggestions would be appreciated!
11-10-2010 10:48 AM
Sorry, but my original post above accidentally dropped part of what I has typed. There are two separate things to deal with: AutoRun and AutoPlan. My post had dropped the AutoRun fix instructions, albeit that was what I first talked about.
If you open Windows Explorer you will see at te bottom left, below the list of things in My Documents, a list of the drives that the computer currently recognizes. If you then plug your SimpleSave drive into the computer, you should see it recognize another drive. Whatevel letter is assigned to that drive is the one you should apply the AutoPlay disable feature to -- that is,m right clicking on that drive and going to the Properties tab.
But before that, go to the Microsoft suport site and use their FixIT links to disable AutoRun.
04-21-2011 10:25 PM
i know this is an old thread but im hoping someone will still be able to help me within the week, if not i will make a new post. Anywho:
I have the simplesave 500gb. It is being annoying and very inconsistent. What i mean when i say this is:
- When i plug the HD into my laptop, it wont work. it DOES NOT run the autorun file. instead it opens the folder that the autorun is in. when i try to manullay open it (i double click the autorun) it does nothing, until i close the folder, in which case it REOPENS.
- HOWEVER when i plug it into any OTHER computer, it works fine. Taking the advice of one of the other posts, i listend to the HD and it didnt make any unexpected noises. It works perfectly fine in every other computer tthough, it opens the autorun, it tries to back-up and the pop-up box with possible actions (view media, oopen files to browse etc).
Why is it not working in the laptop? im positive it is NOT any of my USB connections on the laptop. Therefore i came to the conclusion that there is something wrong with the drivers or something else on the Simplesave Device. Is this correct and HOW DO I FIX IT???