Ask questions. Help others.
The HP Community is here for you.
Post new question
Question
Reply
 
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Highlighted
Honor Student
Posts: 2
Member Since: ‎04-28-2009
Message 1 of 1 (565 Views)

ML Series Raid 1

Hello


I'm completely inexperienced using Raid 1 on HP ML110 G3.
I did follow HP's instructions on BIOS setting IDE to Raid. And then pressing F8 to configuring Raid 1.
That was 'successful'.
Upon boot these messages paint upon the screen:
HP Embedded SATA RAID controller B2067
Press F8
Loading Configuration
Port #00 149 GB Healthy
Port #01 149 GB Healthy

Array #0 Raid - 1 Raid 1 (Mirror) 148.88 GB Optimal

1 Logical Device(s) found 
Bios Found
Windows 2000 Server initiates.

Comment : Because of no usb boot support and no floppy drive I needed to create an ISO disk using
Nlight to install Windows Server 2000.

I don't know how to use Raid 1. With Admin Tools Under Disk Management I see only C: 148.88GB NTFS.
I don't see the second drive.

I download HP Storage Manager. This application reveals nothing that appears familiar.

I do know that Raid 1 Mirror is installed, configured; but, I don't know how Raid 1 is functioning, working, how to interface with Raid.
I don't know how to detect if I will have a drive failure ; and if there is a drive failure ; I'm needing advise what to do with Raid.

Is there an application I should download that would allow user interaction, interfacing?
Should I consider using Norton Ghost to duplicate, and protect the data?
Thanks for any thoughts on this topic.

Chuck M

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation