cancel
Showing results for 
Search instead for 
Did you mean: 
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Highlighted
New member
1 0 0 0
Message 1 of 1
779
Flag Post
HP Recommended

Missing Z240 Network Driver after booting to Windows in SCCM OSD

HP Z240 SFF
Microsoft Windows 10 (64-bit)

When running an SCCM 2012 R2 task sequence to install Windows 10 on a Z240, the network driver is working in Windows PE during the download and apply Windows image. I'm using Auto Apply Drivers step and after it's completed, the computer restarts into the Windows 10 OS, tries to set up the devices and then the task sequence fails because there is no network driver detected that it can use. I've tried to import multiple types of network drivers from both HP and Intel with no success. I've tried to specifically apply the Z240 driver package instead of using Auto Apply Drivers with no success. I've also tried to install a Windows 8.1 image instead and it still fails at the same point. I'm confused because it works fine in PE, but not after restarting and booting into the Windows OS. Any help or suggestions would be appreciated.

0 Kudos
This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation