cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
nanotech2
New member
1 0 0 0
Message 1 of 1
331
Flag Post

My HP Z600 restarts after activating all cores of CPU X5675

HP Recommended
HP Z600
Linux

Hello,

          I have a HP Z600, my old CPU is E5620, works correctly, I have changed the CPU to X5675.

          when i choose 1 or 2 cores and in the bios (Advanced--processor--cores), my computer works correctely, but when i choose All instead of 1 or 2 in the number of cores or activate Hyerthreading or both the computer restarts

         Configuration

         HP Z600

         Motherboard C2-"01/07/10" date

         RAM: DDR3 10800E :20GB

         BIOS V 03.60 (the old is 03.57 and I update it to V 03.60 under windows 7)

         HARD DRIVE: SSD 120 GB

         GRAPHIC CARD: NVIDIA QUADRO NVS 290

         LINUX UBUNTU 14.04 64 bits (I tested 16.04 and opensuse 13.2 but no news)

         in the case of winows its i use the command msconfig and all cores appears, but in linux, I could not see them or have the desktop

Help me to solve these problem. Thank you

       

0 Kudos
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation